Bali 3/8 Inch Midnight Double Cell

Request up to 10 FREE samples by clicking on the link below each sample swatch.

Color Accuracy Policy:
Although we do our best to make sure that the colors printed on our web site are accurate, actual colors will vary. In addition, subtle color differences and textures may not be fully appreciated on some systems due to differences in monitors and/or display cards. Due to the fact that our products are all custom made, and can't be returned, you need to be sure that you can live with any color variations that are possible from our scanning of the actual samples. If an exact color match is required, then please request a sample before placing your order. Once you receive your sample, keep in mind that all samples may still have minimal color variations as stated by the manufacturers. Also, most of our products use Color Coordinated Components. Color Coordinated means similar colors but not necessarily the same exact color. An exact match in color is not always possible for the components of the blind/shade. The color that best coordinates with the product's slat/fabric color will be chosen for use on the components. All components will not necessarily be of the same exact coordinated color. Some examples of color coordinated component would be ladder strings, lift cords, tilter mechanisms, bottom rails, tassels, etc.

Available Options For This Product

Headrail: Standard as Single Headrail, 2 on 1 Headrail Adds $31, 3 on 1 Headrail Adds $38.	Mount: Available as Inside or Outside Mount.
Lift Type: Lift Cord (standard), Cordless adds 45%, Continuous Loop Lift System adds $31, Top Down Only adds $31, Top Down/Bottom Up adds $31.	Brackets: Standard, 2", 2 5/8" or 3 1/2" Extension Brackets.
Hold Downs: Available for Outside Mount Blinds at No Charge.

3 on 1 Headrail	2 on 1 Headrail	Top Down Only	Top Down / Bottom Up

Specifications & Installation Requirements

Product Specifications
Minimum Width	9"
Minimum Height	9"
Maximum Width (As single headrail) (as 2 or 3-on-1 headrail)	96" 192"
Maximum Height	144"
Approximate Deductions for an Inside Mount	3/8"
Top Down Specifications
Minimum Width	18"
Minimum Height	12"
Maximum Width	73"
Maximum Height	96"
Top Down/Bottom Up Specifications
Minimum Width	9"
Minimum Height	9"
Maximum Width	76"
Maximum Height	96"
Continuous Loop Lift Specifications
Minimum Width	18"
Minimum Height	12"
Maximum Width (as single headrail) (as 2 on 1 headrail) (as 3 on 1 headrail)	60" 120" 144"
Maximum Height (as single headrail)	72"

Standard Headrail Requirements
Minimum inside mount depth	5/8"
Minimum inside mount depth (fully recessed)	2"
Minimum outside mounting surface	3/4"
Headrail Specifications
Standard Headrail Depth	1 9/16"
Standard Headrail Height	11/16"
Continuous Loop Lift Headrail Depth	1 5/8"
Continuous Loop Lift Headrail Height	1 1/4"

Product Constraints:

The Top Down feature is not available less than 18 inches wide or greater than 73 inches wide. Also not available less than 12 inches in height or greater than 96 inches in height.

The Top Down/Bottom Up feature is not available less than 12 in height or greater than 80 inches in height. Also not available less than 12 inches in width or greater than 76 inches in width.

The Top Down feature is not available with 2 or 3 on 1 headrail.

How To Measure

Click here to view our detailed Measuring Instructions. Note: This link opens in a new window.

How To Install

View or print our cellular shade installation instructions.

Warranty Information

TYPE OF WARRANTY
Limited Lifetime

WHAT IS COVERED
This DiamondCell™ cellular shade product is warranted
against original defects in materials or workmanship for as
long as the original purchaser owns the product provided
that:

(1)the product was properly installed in a residential
dwelling;
(2)the product was made or assembled exclusively from
Springs Window Fashions’ materials and components;

(3)Springs Window Fashions recommendations were
followed with regard to limitations and specifications.

WHO IS COVERED
This warranty extends only to you as the original purchaser
of the above stated DiamondCell shade.

OBLIGATIONS TO THE CONSUMER
The obligations of Springs Window Fashions are limited
to the repair or replacement of parts or product found to be defective.

Springs Window Fashions is not responsible for shipping
costs or labor costs for measuring and taking the shade
down or reinstalling the product.

If repairs are made under this warranty, the repairs will be
made with like or similar parts.

WHAT THE WARRANTY DOES NOT COVER
This warranty does not cover conditions or damages
caused by accidents, alterations, misuse, or failure to
follow instructions for measurement, installation, cleaning
or maintenance. In addition, normal wear and tear are not
covered by the warranty.

All fabrics can lose original intensity after long exposure to
the sun. When left for extended periods in direct sunlight,
plastics tend to yellow or crack. All cords will eventually wear
out. Springs Window Fashions considers these things normal
wear and tear and are not covered by this warranty.

THIS WARRANTY IS EXCLUSIVE AND IN LIEW OF
ALL OTHER WRITTEN OR ORAL WARRANTIES OR
OBLIGATIONS AND LIABILITIES.

No person is authorized to extend or alter this warranty.

SPRINGS WINDOW FASHIONS SHALL HAVE NO LIABILITY
WHATSOEVER FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES.

Some states do not allow the exclusion or limitation of
incidental or consequential damages, so this limitation or
exclusion may not apply to you.

Shipping Fees

UPS or FedEx Ground Shipping:
This applies to all orders under 96 inches in width or length shipping to an address in the contiguous 48 states of the U.S. If it travels by UPS or FedEx then shipping is FREE! Please call us for shipping quotes outside the covered area. Excluding all Plantation Shutters, which incurrs a $130.00 flat shipping fee per manufacturer.

Oversize Products Shipping Fee:
If your package is 96 inches or over in width or length it will be shipped by common carrier (semi truck) from the nearest manufacturing facility to you. There will be a $60.00 oversize shipping charge for any order with products that are 96 inches or more in width or length. This charge is per manufacturer. Meaning if you order two oversized products and they are from two different manufacturers (two different brands) then there will be TWO $60 charges for a total of $120 shipping. But, if you have more than one product over 96 inches at it is from same manufacturer you will only pay one oversize fee. The fee is per order, not per blind. Excluding all Plantation Shutters, which incurrs a $130.00 flat shipping fee per manufacturer.

Product Reviews:
review this product
There are no reviews for this product.
review this product

We are still adding customer photos to this gallery. Please check back.